Zoompad Pre-order
Pre-order ends in
Pre-order Info
Import Methods
Pre-order Policies
Zoompad comes with everything you need to assemble and use it, except for keycaps and switches.
Please read this entire page before placing an order.
Please refer to the Import Methods tab for delivery estimates
Pre-order ends at 11:59 PM PDT on August 8, 2023
Please do not order any product not on this page with your Zoompad as we cannot hold on to the other items until your Zoompad arrives.
Zoompad parts and components are not compatible with Mammoth20. You cannot combine Zoom75 and Zoompad orders together.
All of the knobs on this page are compatible with any Zoom keyboard with knobs released to date. Nightlight knobs illuminate only when using the Zoompad Tri-mode PCB.
Canadian customers - please do not choose Xpresspost as a shipping method. Each Zoompad (with the exception of Wired Edition) comes with a battery packed inside but not installed in kit. Canada Post does not allow such items to be shipped using Xpresspost
Canadian customers can pay via Interac EMT and get a 4% discount. Please change the currency at the top of the page to USD, proceed to checkout and Interac EMT will show up as an option.
Zoom75 will be imported from China into Canada via two separate shipping methods:
Ocean Freight
Arrives to Canada via a ship. Takes 45-70 days in transit. This is the standard import method used in most keyboard / deskmat group buys. It's much cheaper than Air Express but takes much longer to arrive.
All units ordered via Ocean Freight are scheduled to ship out of Meletrix around October, 2023 and should arrive at Mech.land around November/December, 2023. Please keep in mind it'll be during peak holiday shopping season and the transit times may be unpredictable.
Air Express
Arrives to Canada via a cargo airplane, takes 7-15 days in transit. This import method is very expensive, as such some of the items brought over via Air Express have a markup added to cover the extra expenses
All units ordered via Air Express are scheduled to ship out of Meletrix around October, 2023 and are expected to arrive to us 7-14 days after leaving China.
Please keep in mind it's right around the start of the holiday shopping season and the transit times may be unpredictable.
IMPORTANT
You cannot combine Ocean Freight and Air Express items in the same order. Each individual order has to contain either all Ocean Freight or all Air Express items. This is because they arrive at different times
Please keep in mind the ETA is just our best guess according to the information currently available to us. Unexpected issues and delays can happen at every stage of the process.
Combinations
You cannot add any in-stock items to your order as we cannot guarantee its availability when the group buy is ready to ship.
You cannot combine this group buy order with a previous order as we cannot hold on to an order until the other one arrives.
Modifications
You may modify your order until the group buy ends on August 8, 2023
Please send an email to help@mech.land from the email address associated with your order and list the changes you'd like to see made.
Cancellations
You may cancel your order and get a refund until the group buy ends on August 8, 2023
Please keep in mind we will deduct 4% of the total from the refund as we do not get the transaction fees back from our payment processor.
Updates
Any status updates pertaining to this group buy will be posted in the status updates page.
Please follow the instructions on the contact us page if you need to change your address before the group buy ships.
Zoompad at a glance
14 EE colors
Essential Edition has 14 beautiful case colors with an Electrostatic coating. All EE units come with the Tri-mode PCB.
5 SE colors
Special Edition colors have have an anodized or Electrophoresis finish. They have an accent line at the back and chamfers on the edges (with the exception of GT Silver)
2 Wired Editions
Priced even lower than standard EE, there are two wired editions of Zoompad sold in a pre-set color combo for those who prefer a QMK PCB and a little bit of extra savings.
Zoompad X Kitsune
A Zoompad in collaboration with GMK Kitsune. Has an anodized case like SE units. Comes with engravings on the case with multi colored infill, and a custom special knob.
Backplates and weights
Another way to customize your Zoompad to make it uniquely yours! Each Zoompad comes with a backplate matched to the case and a weight color of your choice. Additional ones can be purchased separately.
Normal & Southpaw Editions
Whether you're a leftie or a righty, there's a Zoompad that was designed just right for you! If you're a leftie or prefer to place the Zoompad to the left of the keyboard then you'll want the Southpaw edition!
Meet Spinny Friends!
Everyone loved the Rabbit knob for Zoom65, so Meletrix invited all its friends too to the Zoompad group buy! They are engraved this time around and are sold separately!
Nightlight knobs
Included with each EE and SE Zoompads, these knobs function just like any other Zoom series knobs, but they have a frosted window to let the LED in the encoder stalk shine through the knob!
Returning fan favorites
By popular demand, the Catpaw, Rabbit and Bear knobs from Zoom65 and Zoom75 are back for the Zoompad group buy! They're compatible with any Zoom keyboards sold to date.
Beautiful packaging
Meletrix didn't just stop at a beautiful numpad, they've made sure it'll arrive to you in a beautiful presentation as well! The storage case shown on the right is sold separately.
Meet Spinny Friends!
Everyone loved the Rabbit knob for Zoom65, so Meletrix invited all its friends too to the Zoompad group buy! They are engraved this time around and are sold separately!
Nightlight knobs
Included with each EE and SE Zoompads, these knobs function just like any other Zoom series knobs, but they have a frosted window to let the LED in the encoder stalk shine through the knob!
Returning fan favorites
By popular demand, the Catpaw, Rabbit and Bear knobs from Zoom65 and Zoom75 are back for the Zoompad group buy! They're compatible with any Zoom keyboards sold to date.
Beautiful packaging
Meletrix didn't just stop at a beautiful numpad, they've made sure it'll arrive to you in a beautiful presentation as well! The storage case shown on the right is sold separately.
Essential Editions (EE)
Special Editions (SE)
Wired Edition & Collaborations
Customization Options
Add-ons & Accessories
Extra plates, PCBs, internal weight, storage bag, keyboard feet etc!
New Tri-Mode PCB
New default PCB for Essential Edition, Standard Edition and Zoompad x Kitsune
Bluetooth, RF & Wired!
An all-in-one PCB! You can connect to your devices via Bluetooth 5.0, 2.4Ghz RF (USB receiver included) and in plain old wired mode. You can charge the battery with any USB-C cable (not included), or simply use it in wired mode for a while!
Multi-layout
The new Tri-Mode PCB is fully compatible with VIA, the powerful GUI widely renowned for it's customizability and ease of use. Remap any key on the keyboard on many different layers, including the knob. Use built in powerful shortcuts and macros, or define your own!
Battery Included
Every Zoompad comes with a 600 mAh Li-ion battery included in the kit. Once it's out of charges simply connect your keyboard to your PC / laptop using the included USB-C cable.
Specs & Kit Contents
EE / SE Kit Contents
- Aluminum top and bottom case*
- Aluminum / SS external weight*
- Aluminum / PVD coated brass rotary Nightlight knob matching the external weight
- Backplate matching the case unless otherwise specified
- Hot-swap, Tri-mode / VIA PCB with per-key RGB without flex cuts*
- Daughterboard + JST cable
- 2.4 GHz Receiver
- Polycarbonate plate
- 600mAh Li-ion battery
- PORON Dampener Kit (Plate foam, switch foam, PCB foam & gaskets)
- 1 set of WS Stabs v3.1 stabilizers
- Silicone Feet
- Screws & Allen keys
No USB cable or storage bag included.
* User customizable option in terms of functionality, color, material and/or finish.
x Kitsune Kit Contents
Same as EE / SE kit, with the following changes:
- Anodized Navy top & bottom case, external weight.
- Anodized Rose Gold backplate & Normal knob
- Side engraving, back USB port & external weight engraving with multi-colored infill.
- Silver polished chamfers.
No USB cable or storage bag included.
Wired Edition Kit Contents
- White variant: White top & bottom case, E-white Normal knob & weight, SS PVD Silver backplate.
- Black variant: Black top & bottom case, Anodized Black Normal knob & weight, Glass Black backplate
- Wired PCB without flexcuts that supports QMK and VIA. Does not have per-key or knob RGB.
- Daughterboard + JST cable
- Polycarbonate plate
- PORON Dampener Kit (Plate foam, switch foam, PCB foam & gaskets)
- 1 set of WS Stabs v3.1 stabilizers
- Silicone Feet
- Screws & Allen keys
No USB cable or storage bag included.
Quality Control Standards
Please read this document to see what type of quality control standards will apply to the Zoompad
Disclaimer
Since there are so many variations, many of the images provided on the product page are renders and are for display purposes only. The renders are given to provide an idea to what the final product will look like. The physical product may have some differences. Please also refer to the prototype's photos as reference before purchasing.
The delivery estimates and production timeline provided on this page are Mech.land and Meletrix's best estimates at the moment. A delay can happen at any stage of the process due to a multitude of reasons beyond our control.
Specifications
- Gasket mount design
- Keyboard layout: 20 keys
- 1.2mm PCB with Ai03 Universal DB
- Default plate: Polycarbonate
- 5° Typing angle
- 20mm front height
- Case dimension is 94.8 x 145.7 x 34.7mm or 3.73 x 5.74 x 1.37 inches.
- Finish treatment: Electrostatic coated, anodized and electrophoresis depending on edition and color.
- Default Tri-mode PCB in EE, SE & Kitsune can be used in wired, Bluetooth or RF mode with the USB receiver.
- Tri-mode PCB supports VIA and not QMK, wired PCB supports both QMK and VIA.
- Tri-mode PCB BT polling rate: 125hz
- Tri-mode PCB 2.4GHz polling rate: 1000hz
- Tri-mode PCB wired mode & wired PCB polling rate: 1000hz
- Essential kit with Alu knob / weight / Glass Mirror Back Plate: 0.67 kg
- Essential kit with brass knob / PVD SS weight / Glass Mirror Back Plate: 0.72kg
- Essential kit with Alu knob / weight /PVD Back Plate: 0.72 kg
- Essential kit with brass knob / PVD SS weight / PVD Back Plate: 0.77 kg
- Nightlight knobs only illuminate when used on a Tri-mode PCB. They still fit the wired PCB but there won't be any lights.
Other Features
Unique chamfer
Special Edition Zoompads (with the exception of GT Silver) will have an accent chamfer on the inside edges. Chamfers are polished too like in Zoom75.
Nightlight knobs!
These new default knobs function just like any other Zoom series knobs, but they have a frosted window to let the LED in the encoder shine through the knob!
Per-key RGB
The Tri-Mode PCB support per-key RGB lighting. You can choose from provides a wide range of colors and effects for a different visual experience. The wired only PCB doesn't support this feature.
Perfect for Zoom75
Zoompads are the perfect companion to Zoom75! Zoompads come in the exact same colors as Zoom75. When placed side by side, they have the same typing angle and front to back length. Leave a screen on your Zoom75 and use the knob on your Zoompad, or have a setup with dual knobs - your choice!
Hot-swap Switches
Both wired and Tri-Mode Zoompad PCBs feature Kailh Hot Swap sockets that allow you to just push the switches on, no soldering required! Changing switches is a breeze, you can go from linear to tactile in a matter of minutes, all on the same keyboard!
WS Stabilizers V3.1
A slight revision of the new stabilizers were under development for almost one year, and will be included with every edition of the Zoompad.
Gasket mount
Zoompad uses a gasket isolation mount structure for a soft, bouncy and pleasant typefeel that won't fatigue your fingers even after hours of typing. Gasket mount keyboards sound better and feel more even throughout the board than the typical off-the-rack tray mount keyboards.
Gasket Sleeves
The gasket sleeves are made of supercritical foam, it can stabilize the plate as the same time giving appropriate space allowing it to flex in a balanced way. Just the right softness, not too stiff, not too much flex.
Foam included
In order to reduce resonance, many tests were done on the foaming material of the Zoompad. Meletrix made the new PORON lighter and denser, as a result they make the keyboard sound more concentrated and deeper than stock settings.
